Troubleshooting Passenger + Nginx and Meteor
This page provides guidence on what to do when you encounter problems.
Table of contents
First things to try
1 Check the Passenger log file
One of the first things you should do upon encountering a problem, is to check the Passenger log file. The log file is where Passenger prints to when it encounters a problem or when it wants to tell you something.
This log file contains:
- Passenger info, warning and error messages.
- Everything that the application writes to STDOUT and STDERR. This typically consists of errors that the application encounters during startup, but not errors that it encounters when it's handling requests.
The Passenger log file is the global Nginx error log file. This is one specified by the
error_log directive in the main context (that is, not the one inside the
http context). The file is typically located in
Or, if you configured the passenger_log_file directive, then the log file is in the referenced file.
2 Check the application log file
The application or web framework may have its own log file that is independent from the Passenger log file. You should also check that file to see whether your application or web framework has logged any important messages.
Note that Passenger runs applications in the "production" environment by default (that is, Passenger sets
NODE_ENV and related environment variables "production"). So if you're using Rails, please be sure to check
production.log instead of
3 Upgrade Passenger to the latest version
Some problems are caused by bugs in Passenger. Passenger is under active maintenance and development, so there is a chance that – assuming you really ran into a bug – the bug is already fixed. Please upgrade Passenger to the latest version and check whether the problem is still there.
If you suspect that your problem is a bug in Passenger, and upgrading didn't fix it, please report the bug to our Github issue tracker.
If upgrading Passenger didn't help, and you don't think your problem is caused by a bug, then please continue with this troubleshooting guide.
4 Consult the in-depth topics
Passenger takes care of a lot of things for you under the hood. If you don't know what Passenger does, then problems may seem opaque. Try learning more about the activities that Passenger perform; it may help you with understanding the problem and with troubleshooting.
5 Out of ideas? Try the support resources
If you are stuck with a problem, please do not hesitate to contact one of the support resources. Passenger has a friendly community of users who look out for each other. We – Passenger's authors – are also ready to help you whenever we can.
- Stack Overflow
- Post a question on Stack Overflow if you are experiencing problems. Support on Stack Overflow is provided by the community, and our own developers also watch Stack Overflow on a regular basis. But support here is provided on a best-effort basis, so sometimes a bit of patience will help. Be sure to use the "passenger" tag.
- Github issue tracker
- If you are experiencing a problem that you believe is a bug, please report it here.
- Security vulnerabilities email address
- Please report security vulnerabilities to email@example.com. We will do our best to respond to you as quickly as we can, so please do not disclose the vulnerability until then.
- Priority support for Enterprise customers
- If you are a Passenger Enterprise customer, then you are eligible for basic priority support. Please submit your support ticket via the interface in the customer area.
For most customers, this basic priority support has a response time of 3 working days, with a maximum of 1 support incident per month. Please consult your contract for the exact support level that you are eligible for.
- Premium support contracts
- We also provide premium support contracts for those who desire higher support levels, for example 24x7 phone support with a response time of 1 hour.
Why does the first request take a long time?
The first request to your application takes more time than usual. Subsequent requests have the normal speed.
Passenger starts your application the first time it is accessed, not during web server startup. Some applications can take several seconds to start. If you're using Ruby on Rails, then needing 10 seconds to start your application is normal. On slow or heavily loaded servers, or in case of large and heavy applications, the startup time may be even longer.
Use the passenger_pre_start configuration option.
I get "command not found" when running a Passenger command through sudo
Passenger commands can be found as a normal user, but not when run through sudo:
$ passenger-status ...some output, but no "command not found" error... $ passenger-install-apache2-module ...some output, but no "command not found" error... $ sudo passenger-status sudo: passenger-status: command not found $ sudo passenger-install-apache2-module sudo: passenger-install-apache2-module: command not found
The operating system looks up commands using the PATH environment variable. However, sudo resets all environment variables to a default value, dictated by sudo. If Passenger was installed to a location that is not in the default sudo PATH value, then sudo will not be able to find the Passenger commands.
In addition, if you installed Passenger using a Ruby interpreter that was installed through RVM, then you must use rvmsudo instead of sudo. As a rule, when you're an RVM user, always use rvmsudo instead of sudo.
Execute the command using its full path. You can use
which as a normal user to lookup the full path:
$ which passenger-status /somewhere/bin/passenger-statusNext, run full path of the command using either sudo or rvmsudo:
$ sudo /somewhere/bin/passenger-status # -OR, if you're using RVM:- $ rvmsudo /somewhere/bin/passenger-status
When using sudo, you will probably run into similar "command not found" issues in the future, with components other than Passenger. We strongly recommend you to learn about environment variables so that you know what to do in the future.
Upon accessing the web app, Nginx reports a "404 Not Found" error instead of displaying my web app
You visit your web app, but instead of seeing your web app, you see a 404 Not Found error page. In addition, you also see a piece of text that the 404 Not Found error page is generated by Nginx.
If you look in the Nginx error log, you see an error message like this:
2015/07/02 20:14:17 [error] 31746#0: *80 "/app/public/index.html" is not found (2: No such file or directory), client: 127.0.0.1, server: 127.0.0.1, request: "GET / HTTP/1.1", host: "foo.com"
There are several common causes for this problem.
Cause and solution #1
You did not enable Passenger in the corresponding
server block with passenger_enabled on.
To solve this problem, please specify
passenger_enabled on in your Nginx configuration file, inside your app's
Cause and solution #2
If you did enable Passenger with
passenger_enabled on, then maybe the problem is that you did not configure Nginx to enable the Passenger module. Please check whether your Nginx configuration file contains the passenger_root option. If it doesn't, please add it.
Cause and solution #3
If you did enable Passenger with
passenger_enabled on, and
passenger_root is also specified in your Nginx config file, then it is likely that Passenger encountered an error during initialization. If Passenger was not able to initialize, then it will log the error, and then Nginx will behave as if Passenger was never installed in the first place. As a result, Nginx will try to serve static files in your web app's static files directory, fail to do so, then report a 404 Not Found error.
To solve this problem, please open the Passenger log file and look for any error messages there. The error messages will tell you why Passenger failed to initialize. Please take action accordingly.
Cause and solution #4
Make sure Passenger recognizes your application. If autodetection fails, for example because you are using non-standard filenames, you might have to specify additional options.
Upon accessing the web app, Nginx reports a "Permission denied" error
A typical error message looks like this:
2013/10/21 17:16:03 [alert] 98687#0: *1 Cannot stat '/Users/phusion/Sites/rack.test/config.ru': Permission denied (errno=13); This error means that the Nginx worker process (PID 99064, running as UID 70) does not have permission to access this file. Please read this page to learn how to fix this problem: https://www.phusionpassenger.com/library/admin/nginx/troubleshooting/?a=upon-accessing-the-web-app-nginx-reports-a-permission-denied-error; Extra info, client: 127.0.0.1, server: www.foo.com, request: "GET / HTTP/1.1", host: "www.foo.com"
Passenger tries to access your application directory in order to find out what language it's written in. This access is initiated from inside an Nginx worker process. This error indicates that the Nginx worker process does not have the proper permissions to access your application's root directory.
You need to relax permissions to that the Nginx worker process can access your application directory, by making the directory group- and world-executable:
sudo chmod g+x,o+x /Users/phusion/Sites/rack.test
You also need to ensure that all parent directories are also 'executable' by the Nginx process:
sudo chmod g+x,o+x /Users/phusion/Sites sudo chmod g+x,o+x /Users/phusion sudo chmod g+x,o+x /Users
On Unix, the 'executable' permission on directories dictates whether a process is allowed to access files or subdirectories within that directory. The 'readable' permission dictates whether a process is allowed to see what files are inside the directory, but does not necessarily allow access to them. You can learn more at Wikipedia.