Installing Passenger
Red Hat 7 / CentOS 7 (with RPM)
Relevant selection for this article:
No Amazon Linux RPMs
Our YUM repository may not be used with Amazon Linux. Amazon Linux is too different from Enterprise Linux. If you are on Amazon Linux, please go back to the operating system selection menu and select "Other / OS independent (generic installation method)".
Table of contents
- Loading...
Step 1: enable EPEL
The instructions differ depending on whether you are on Red Hat or another Enterprise Linux. The second step is only necessary on Red Hat.
| Step 1: install EPEL package |
Passenger requires EPEL.
$ sudo yum install -y yum-utils $ sudo yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-$(< /etc/redhat-release tr -dc '0-9.'|cut -d \. -f1).noarch.rpm $ sudo yum-config-manager --enable epel $ sudo yum clean all && sudo yum update -y |
|
Step 2 (RHEL only): enable the 'optional' repository |
Enable the optional repository (rhel-7-server-optional-rpms). This can be done by enabling the RHEL optional subchannel for RHN-Classic. For certificate-based subscriptions see Red Hat Subscription Management Guide.
The following commands may be helpful, but are not thoroughly tested.
$ sudo subscription-manager register --username $RHN_USERNAME --password $RHN_PASSWORD --auto-attach $ sudo subscription-manager repos --enable rhel-7-server-optional-rpms |
Step 2: repair potential system issues
These commands will fix common issues that prevent yum from installing Passenger
# Ensure curl and nss/openssl are sufficiently up-to-date to talk to the repo
sudo yum update -y
date
# if the output of date is wrong, please follow these instructions to install ntp
sudo yum install -y ntp
sudo chkconfig ntpd on
sudo ntpdate pool.ntp.org
sudo service ntpd start
sudo yum -y install chrony
sudo systemctl enable chronyd
sudo firewall-cmd --permanent --add-service=ntp
sudo firewall-cmd --reload
sudo systemctl restart chronyd
Step 3: install Passenger packages
These commands will install Passenger through Phusion's YUM repository.
If you want to use our packaged Nginx module, you must use your distro's provided Nginx package. If for example you have the repo provided by NGINX setup, you will instead need to compile a dynamic module compatible with that Nginx.
# Install various prerequisites
sudo yum install -y pygpgme curl
# Add our el7 YUM repository
sudo curl --fail -sSLo /etc/yum.repos.d/passenger.repo https://oss-binaries.phusionpassenger.com/yum/definitions/el-passenger.repo
# Install Passenger
sudo yum install -y passenger || { sudo yum-config-manager --enable cr && sudo yum install -y passenger ; }Step 4: check installation
After installation, please validate the install by running sudo /usr/bin/passenger-config validate-install. For example:
$ sudo /usr/bin/passenger-config validate-install * Checking whether this Phusion Passenger install is in PATH... ✓ * Checking whether there are no other Phusion Passenger installations... ✓
All checks should pass. If any of the checks do not pass, please follow the suggestions on screen.
Step 5: update regularly
Passenger updates and system updates are delivered through the YUM package manager regularly. You should run the following command regularly to keep them up to date:
$ sudo yum update
After an update, you should restart all your Passenger instances so that the updates take effect.
Edit page
